Fully built Kamtec RC Banger car with New Top Plate Design

Extra Long XL Wheelbase 295mm to accept the XL range of bodies , see adverts 

Comes fully built including ABS body shell , servos , speedo ,  motor and wheels and tyres .

New Top Loaded battery design using a latch retainer

In line forward located battery for better weight distribution . 

Very strong 2.4mm thick top plate 

Receiver guard

Body Shell will be random and needs cutting out , painting and mounting 

Car will have tyres glued and trued onto the rims 

Top Plate fits our existing XL Chassis and can be bought separately 

Tested by Kieran Koonta Briddock and used by Dave Hog Andrews who both said it was a brilliantly balanced car

All you need to add is battery and receiver to go RC Banger Racing .

Designed to race in the indoor Oval Racing Series in UK and Europe 

Available in Standard , Long and XL ( extra long ) Wheelbases 

Soon will be available as a kit 

Fully legal for BWS and IWS 

Check out our products on RCKicks on YouTube 

Features 3mm Alloy Chassis ,  Satan Motor , 2 Servos , 2 speed mechanical Speedo , 

Needed to go racing : 4 cell Battery , Radio Set and Charger , all available from Kamtec

NO upgrades needed 

Designed to utilise all Kamtec commercially available parts

Spec may change so please check with us if in any doubt 

This is a Kamtec product 

 

£134.00 *
Delivery weight: 1.2 kg

Accessories

New Manual Speed Controller Board made by Kamtec Models 

Brilliant for Bangers , Saloons , 1300 Stock Car etc that use a Mech. speedo

2 Speed mechanical copper board with Deans connector and Futaba power lead

Compatible with similar Mechanical speed controller boards and rotor discs

Already used and endorsed by many top RC Banger Drivers

Speed board only , needs to be used with a compatible top plate and rotor disc.

Top quality materials and thick copper circuit board has been used 

If in any doubt please ask , this is not a complete speedo controller

 

 

This item is £4.50 if purchased directly from Kamtec

 

£4.50 *
Delivery weight: 0.1 kg


can be shipped within 2/3 days

 S Disc for K10 Manual Speed Controllers 

New design contact disc for Futaba Servo

Comes complete with wires and servo horn to fit Futaba servo.

Featuring a sprung GRP S Disc with copper contacts that can swivel as the disc rotates .

Brilliant for Bangers , Saloons , 1300 Stock Car etc that use a Mech. speedo

 
This S Disc will ONLY FIT a FUTABA Servo 

Note: A Standard Kamtec car uses a Futabe servo , Large It car uses an Emax 

See other advert for Emax version 

This disc needs to be used on a Kamtec K10 Speedo and will need to be soldered to your motor. 

Already used and endorsed by many top RC Banger Drivers

Wired Disc only , needs to be used with a compatible top plate and Futaba servo

Attach this disc with the copper contacts lined up across the car as in the pic. 

If in any doubt please ask , this is not a complete speedo .

You will receive 1 Speed Disc as shown in picture .

Soldered and wired up boards as well as complete Speedos are available 

Postage is £4.00 but you can spread the postage over many Kamtec items purchased on the same day . 

 

 

£3.50 *
Delivery weight: 0.1 kg


can be shipped within 2/3 days

New from Kamtec ! 3mm XL Limousine Chassis !

Extra long 3mm Aluminium Alloy countersunk Chassis Plate for 1:12 cars. 

Known as XL Chassis  295mm Long Wheelbase Chassis to convert your Banger into LWB .

Made from top quality T6 Alloy

This is 45mm longer than our LWB chassis and 92mm longer than Standard.

There are no bodies to fit this Chassis , you need to extend a bodyshell 

Bodies will soon be made this length 

5.5mm access holes allow you to remove motor pod and rear V10 mount very quickly

Front body post holes drilled and countersunk ready for Kamtec Multihole Posts

Works best with Kamtec K10 Speed Controllers and accepts K9 or short Large It Speedos .

Deburred and chamfered corners 

Standard and Long Wheelbase Chassis available , see other adverts.

Gives a wheelbase of 295mm which is 92mm longer than standard .

Designed to fit Bangers 

Pre drilled for Kamtec Multi Hole body posts or V10 Mounts. 

Made from top grade 3mm Aluminium Alloy .

Countersunk and chamfered. No sharp edges .

Uses the same hole centres and is compatible with most parts.

Available in Standard Wheelbase.

 

£9.99 *
Delivery weight: 0.3 kg


can be shipped within 2-3 days