K3 1:8 Stock Car With Bulge ABS

£9.99
incl. VAT, plus delivery
In stock
Delivery time: 2/3 day(s)

Description

K3 1:8 scale Stock Car Bodyshell

K3 1:8 scale Stock Car Bodyshell from Kamtec !!  Known as Kamtec K3 . This version has a side bulge for rear exhaust engines !  Designed to be a reasonably scale version of a modern F1 V8 Stock Car. Launched at the 1:8 World Stock Car Final at Notts and Derby to very good reviews. First shown to the public the week before at the Full Size World Final when it was unsignwritten . Went down very well in the pits at Coventry Stadium with Frankie Wainman Jr - see pic. The body is not a strict replica but its clear to see that it is based on Jr's tarmac car. The wing in the pic is now in production and sold seperately. Since the pictures a small bulge has been added on the bonnet to create some servo saver clearance . The drivers commented it needed to be run low as in the pics above to look scale. You can see the servo saver is peeping through a hole to achieve the bonnet height. This wont need to be done. Also made without side exhaust bulges . This sale is for a body shell only , moulded in thick white ABS plastic ready to be cut out and painted. If you are unaware of the work involved with this product please seek advice as they need a fair bit of expert fitting. This sale is for a body with an exhaust bulge. This ABS shell has be designed to fit a Mardave , Kingsway or Pole chassis and should fit scratch built chassis and utalise their standard mounts .

K3 1:8 scale Stock Car Bodyshell

K3 1:8 scale Stock Car Bodyshell from Kamtec !!  Known as Kamtec K3 . This version has a side bulge for rear exhaust engines !  Designed to be a reasonably scale version of a modern F1 V8 Stock Car. Launched at the 1:8 World Stock Car Final at Notts and Derby to very good reviews. First shown to the public the week before at the Full Size World Final when it was unsignwritten . Went down very well in the pits at Coventry Stadium with Frankie Wainman Jr - see pic. The body is not a strict replica but its clear to see that it is based on Jr's tarmac car. The wing in the pic is now in production and sold seperately. Since the pictures a small bulge has been added on the bonnet to create some servo saver clearance . The drivers commented it needed to be run low as in the pics above to look scale. You can see the servo saver is peeping through a hole to achieve the bonnet height. This wont need to be done. Also made without side exhaust bulges . This sale is for a body shell only , moulded in thick white ABS plastic ready to be cut out and painted. If you are unaware of the work involved with this product please seek advice as they need a fair bit of expert fitting. This sale is for a body with an exhaust bulge. This ABS shell has be designed to fit a Mardave , Kingsway or Pole chassis and should fit scratch built chassis and utalise their standard mounts .