XERUN - Brushed Electronic Speed Controller

XR10 - Pro - Stock Spec - 1S - V4 - Black

• Small & Lightweight
  The small size (20% smaller than the standard version XeRun XR10 Pro 1S) saves space and the light weight (only 23.5g w/o wires) provides more weight margin when adjusting the balance of the chassis.Special Design for Stock 1S Class Racing
  The reliable hardware combined with powerful software (contains 5 common select-to-use profiles) provides an ideal power solution to the 1/12th Stock 1S class racing.Super Internal BEC
  The built-in boost BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows users to use various, servos and receivers (without connecting any extra battery).Adjustable Throttle & Brake PWM Frequencies
  The independent and adjustable throttle & brake PWM frequencies guarantee users the precise and accurate throttle and brake control.Programming/Upgrading/Data Reading Wirelessly
  With Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.Built-in Electronic Switch
  The internal electronic switch with a lifespan of over 50000 on/off cycles completely solves the problems like stuck reed, rust contact points, and automatic shutdown conventional mechanical switches often have.Data-logging Capability
  This ESC features the data-logging function which will record the maximum ESC& motor temperatures, the maximum motor RPM, and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use.
  Type
  Scale - 1/12th
  Brushed/Brushless - BL
  Sensored/Sensorless - SD
  Waterproof - NoSpecifications
  Cont./Peak Current - 80A/380A
  Input Voltage - 1S Lipo/3-4 Cell NiMH
  BEC Output - 6V/7.4V@3AWires & Connectors
  Input Wires - Black-14AWG-200mm*2
  Output Wires - Black-14AWG-200mm*3
  Input Connectors - No
  Output Connectors - No
  (Note: All the wire length above is the original length not the length you see from the outside.)ESC Programing via
  SET Button on ESC - Not Supported
  LED Program Box - Not Supported
  LCD Program Box - Supported
  WiFi Module - SupportedProgramming
  Separate Programming - Firmware
  Firmware Upgrade - SupportedSize & Weight
  Size - 31.6x25.8x16.2mm
  Weight - 23.5g (w/o Wires)Applications
  Motors
  SL BL Motors
  SD BL MotorsVehicles
  Stock 1S class of 1/10th & 1/12th on-road racing.
  KV Rating/T Count - ≥10.5T, 3650-size Motor