CARAVAN TOW HITCH

Tow Hitch set for towing a Caravan with a 1:12 Banger or saloon car .

Please see pics for fitting.

Attach the black GRP beam to the rear of your chassis with the M3 nuts and bolts supplied.

The holes will match a Kamtec Chassis or any chassis drilled with 48mm spacing for a V10 mount.

Fix the 35mm M3 bolt with an M3 nyloc nut as pictured .

Slip Caravan over bolt and screw on an M3 nyloc nut .

Wind down until most of the movement is taken up but leave some movement .

A spring from the front suspension can be used under the top nut ( see pic )

if preferred to a bit of movement .

NOTE , The spring is not supplied or necessary for this hitch to work

Spring is a spare front suspension spring but is not considered needed

since pics were taken

You receive parts in last picture