S Disc for K10 Manual Speed Controllers 

New design contact disc for EMAX Servo

Comes complete with wires and servo horn to fit Emax servo.

Featuring a sprung GRP S Disc with copper contacts that can swivel as the disc rotates .

Brilliant for Bangers , Saloons , 1300 Stock Car etc that use a Mech. speedo

  This S Disc will ONLY FIT an Emax Servo 

Note: A Standard Kamtec car uses a Futabe servo , Large It car uses an Emax 

This disc needs to be used on a Kamtec K10 Speedo and will need to be soldered to your motor. 

Already used and endorsed by many top RC Banger Drivers

Wired Disc only , needs to be used with a compatible top plate and Emax servo

Attach this disc with the copper contacts lined up across the car as in the pic. 

If in any doubt please ask , this is not a complete speedo .

You will receive 1 Speed Disc as shown in picture .

Soldered and wired up boards as well as complete Speedos are available 

Postage is £4.00 but you can spread the postage over many Kamtec items purchased on the same day 

S Disc for K10 Manual Speed Controllers 

New design contact disc for EMAX Servo

Comes complete with wires and servo horn to fit Emax servo.

Featuring a sprung GRP S Disc with copper contacts that can swivel as the disc rotates .

Brilliant for Bangers , Saloons , 1300 Stock Car etc that use a Mech. speedo

  This S Disc will ONLY FIT an Emax Servo 

Note: A Standard Kamtec car uses a Futabe servo , Large It car uses an Emax 

This disc needs to be used on a Kamtec K10 Speedo and will need to be soldered to your motor. 

Already used and endorsed by many top RC Banger Drivers

Wired Disc only , needs to be used with a compatible top plate and Emax servo

Attach this disc with the copper contacts lined up across the car as in the pic. 

If in any doubt please ask , this is not a complete speedo .

You will receive 1 Speed Disc as shown in picture .

Soldered and wired up boards as well as complete Speedos are available 

Postage is £4.00 but you can spread the postage over many Kamtec items purchased on the same day